adminpawliuz

Spa 20, 2014

Lithuanian approach to EN 1997-1 Eurocode 7 of the determination of characteristic parameters values

ABSTRACT: The fundamental soil parameter used in Eurocode 7 is the characteristic value Xk, from which the design value Xd is derived. These soil parameters are defined and compared to todays practice. A simple approach is proposed for the determination of the characteristic value. If offers an existing to incorporate experience or judgmental knowledge as well as test values to produce characteristic values Xk. The resulting characteristic values are equally valid using EC7 as well as for today’s design methods. The values used in design calculations are termed design values and these are obtained from tests results via derived values and characteristic values.

S. Anilionis
JSC InGeo, Klaipeda, Lithuania

Skaityti toliau →

Vas 17, 2014

Experience with lightweight pushing equipment and CPT in Lithuania

S. Anilionis

JSC InGeo, Klaipeda, Lithuania

ABSTRACT: In situ testing in geotechnical engineering has traditionally been carried out using relatively heavy equipment. Smaller soil exploration equipment allow the use of the cone penetration test (CPT) to be used for some geotechnical work with difficult or limited access.

Skaityti toliau →

Vas 14, 2014

Jūrinio slėnio geotechninės įrangos naudojimas uosto teritorijos tyrimuose

Klaipėdos uosto teritorija pasižymi sudėtingomis ir specifinėmis geologinėmis sąlygomis, todėl inžineriniai geologiniai bei geotechniniai (IGG) tyrimai čia turi būti atliekami ypač kruopščiai ir naudojant modernią įrangą.

Skaityti toliau →